Ask Experts Questions for FREE Help !
Ask
    cwhb07's Avatar
    cwhb07 Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 18, 2007, 04:55 PM
    Basement wiring
    I am getting ready to wire my basement. In the basement there will be 3 gfi outlets, 8 outlets and two ceiling lights. Also in addition to the two ceiling lights in the finished area I want to put two pull chain lights on a switch. My question is will 12/2 wire be heavy enough to wire everything. Also will each gfi have to be wired separately or can they be wired together. They are the type that has the reset on the outlet. On the regular outlets there will be a TV, stereo, mini fridge, wine cooler fridge, microwave, and a blender. Yes I am putting in a bar. Will this work to wire these in a series or will I be overloadind the 20 amp breaker.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #2

    Mar 19, 2007, 06:30 PM
    #12 wire is fine, but considering the amount of appliances I would use at least tow 20 amp circuits all with #12 wire. The lighting can be on a 15 amp circuit with #14 wire, or even connect to an existing lighting circuit. Tis will help keep the load down, and eliminate lights flickering from the appliances starting.

    One GFI outlet can protect several.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Basement Wiring [ 4 Answers ]

Hi, I'm currently wiring my basement soon which is about 1000 square feet. It will include a family room, a bedroom and a bathroom. I currently have one 15 amp 14/3 circuit running down there connected to one circuit breaker from the main panel. I've calculated that I need a total of 2 15 amp...

Basement wiring [ 1 Answers ]

Lots of questions. Finishing a basement with a bathroom, bedroom and a family room. Are GFI circuit breakers or outlets needed in the basement family room? Arc fault breakers are required in bedrooms only and are gfi's required in a basement bedroom? Running a 20amp separate circuit for...

Wiring basement [ 1 Answers ]

I am using metal studs in my basmsnt. I positioned each outlet 18inches on center from floor. I purchased the grommets and am ready to start fishing the wire. Can I use the hole in the stud located 5 inches lower than each outlet location in order to save wire? That is, the next available hole...

Wiring basement lighting [ 1 Answers ]

I am wiring a basement for ceiling lights. I have not purchased fixtures yet and we want submerged lighting. My basement is rather small and I have decided to put up 8 fixtures and they will be switched on and off with (2) 3way switches one at top of stairs one at bottom. They breaker panel is new...

Wiring basement [ 2 Answers ]

I am wiring a finished basement. The problem is the main panel is in the Gar 200a service. This is abour 65 ' away from the finished basment. I was going to run 2 20 amp breakers for the basement room.. it will have lites, frig, entert. Center etc. My question is I want to run a 50 amp...


View more questions Search