Ask Experts Questions for FREE Help !
Ask
    mojoo's Avatar
    mojoo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 27, 2008, 04:47 PM
    B & S carb linkage
    Briggs & Stratton carb linkage
    Need detail for linkage setup on 7 hp engine, including springs and control lever setup.
    Any suggestions on a source?
    Mojoo
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snow blower linkage [ 13 Answers ]

I have a Sears snow blower Model 247.88664 I took the carb off & cleaned it & all ready to go BUT I can't seem to hook up the linkage no matter how hard I try I bet I tried at least two hrs or more I don't give up easy but I finally had to walk away. It has springs on which I did not fool with the...

Carberator linkage for lawn mower [ 1 Answers ]

I need a diagram or picture for throttle linkage for a craftsman eagar-1 push lawn mower model# 917-386140, engine model#143.965002.

Removing triplever linkage [ 2 Answers ]

I live in an older home and have taken showers instead of baths. The lever will not move so I was going to replace the linkage, but it is stuck. What do I do?

Briggs Linkage Problems [ 1 Answers ]

I've just installed a new Flo-Jet, 11-12 H.P. L-Head carb on an older 11 hp Craftsman tractor. In the process I inadverently knocked the shorter linkage off the throttle control bracket (the other end than the carb end). Is there a handy diagram you know of that clearly shows where the hooked end...

Linkage needs adjusting? [ 3 Answers ]

I have a 95 wrangler. I am having trouble engaging first and reverse on a manual. You really have to shake the shifter to get it in gear. It only happens on 1st and R, is this a problem with my linnkage in my shifter.

View more questions Search