Ask Experts Questions for FREE Help !
Ask
    Judy A Query's Avatar
    Judy A Query Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2012, 06:51 PM
    Goodman furnace model capf3030b6ba
    October 2010 a had a new house built. The furnace and ac is a Distinctions. The model number is: CAPF3030B6BA and serial number is: 1006766521.

    In a 1 1/2 years the compressor has gone out. I would like to know if this model continues to be made and if compressors are readly available.

    The unit came from Goodman Company in Houston, Texas.

    When was this unit manufactured?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Jul 7, 2012, 07:07 PM
    Quote Originally Posted by Judy A Query View Post
    October 2010 a had a new house built. The furnace and ac is a Distinctions. The model number is: CAPF3030B6BA and serial number is: 1006766521.

    In a 1 1/2 years the compressor has gone out. I would like to know if this model continues to be made and if compressors are readly available.

    The unit came from Goodman Company in Houston, Texas.

    When was this unit manufactured?
    I am sure the compressor is still available but by the time you buy it and have it installed you might consider getting a new unit with a warranty. Actually I would be finding out why the compressor went bad to start with. I have 3 central airs in this home and one was installed in 1978 and the other 2 were installed in 1985 and none of them has ever had a compressor replaced.

    Usually compressor replacement is caused by a bad install or improper setup and service. Some new units do come with a 10 year warranty on parts and labor so keep that in mind while you are searching for a real qualified company to do the work since the last company you used did not seem to do so well. Good luck.

    That model number I believe is for a coil. See below


    http://www.proveedoratermica.com/images/capfmsds.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace Model GMPN100-4--No Heat [ 3 Answers ]

The inducer fan motor starts,the hot surface igniter heats up and the gas valve opens producing a nice blue flame for 3 or 4 seconds and the gas valve shuts off. There are no red flashing lights to indicate a problem with any components. This unit was built around 1993. Any ideas on what might be...

I have a goodman furnace; I don't know the model number, but it's not working. [ 0 Answers ]

There are 2 blowers on it, but one of them was not working, so I took it to the store to have it checked, and he said it worked just fine, so my problem must be the circuit board. Is there anything else that I can check?

Goodman Model# CAPF3030B6BA? [ 2 Answers ]

Hello, I live in Pittsburgh where it is currently about 15 degrees. I just had a Goodman Model# CAPF3030B6BA newly installed. I have the temperature set on 68 when I'm home and 65 at night and when I'm not home. I have observed that the first floor warms to the selected temp but the second...

Goodman furnace model GMT 015-3 [ 1 Answers ]

The blower works when thermostat is switched to Fan, but there is not heat. Once I switch to Auto, there is not heat and the blower does not work. Temperature is set above the current room temperature. Would that be caused by a board issue? The red light just stays on, does not blink at...

Goodman Furnace Model GMPN080-4 one red blink [ 3 Answers ]

Furnace turns on the igniter glows but does not ignite (the gas valve is not turning on) it does this 3 times before turning off the circuit board blinks 1 time.. I replaced the flame sensor and it still does the same thing checked the gas valve and its not getting 24volts to it.. anybody have any...

View more questions Search