Ask Experts Questions for FREE Help !
Ask
    austin123's Avatar
    austin123 Posts: 2, Reputation: 1
    New Member
     
    #1

    Dec 14, 2008, 09:22 PM
    Coleman evcon oil furnace
    I have an older coleman evcon oil furnace that ran fine until today.It still runs but the smoke exiting the chimney is pure black and sooty. Would this be an indication it's not getting enough air or maybe getting too much oil? Don't have any experience with oil furnaces. Thanks, Ken
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #2

    Dec 14, 2008, 09:38 PM

    Could be any number of things, but most likely the nozzle is fouled and not misting the fuel properly, and/or the flame head is gunked up and spoiling the swirl of the primary air.
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
     
    #3

    Dec 14, 2008, 09:40 PM

    I agree. I'd say it's time for a tune-up.
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
     
    #4

    Dec 14, 2008, 09:40 PM
    KC13,did you stay at the Holiday Inn express lastnight?
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #5

    Dec 14, 2008, 09:55 PM
    Quote Originally Posted by hvacservicetech_07 View Post
    KC13,did you stay at the Holiday Inn express lastnight?
    No, but I was around some people today who did. The power rubbed off on me.
    austin123's Avatar
    austin123 Posts: 2, Reputation: 1
    New Member
     
    #6

    Dec 14, 2008, 09:59 PM
    Quote Originally Posted by hvacservicetech_07 View Post
    I agree. I'd say it's time for a tune-up.
    Thanks-I'll call for a tuneup
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
     
    #7

    Dec 14, 2008, 10:33 PM
    Lol
    hvacservicetech_07's Avatar
    hvacservicetech_07 Posts: 1,083, Reputation: 75
    Ultra Member
     
    #8

    Dec 14, 2008, 10:34 PM
    BTW,Congrats on the full member status.
    KC13's Avatar
    KC13 Posts: 2,556, Reputation: 99
    Ultra Member
     
    #9

    Dec 14, 2008, 10:36 PM

    Whoa, yeah, I just saw that. Cool, thanks!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Coleman evcon furnace [ 4 Answers ]

Furnace will won't heat. Model #BGMO7516B Serial # 980905038. Red light blinks once. Will ignite but won't kick in to heat.

Coleman evcon furnace [ 5 Answers ]

My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls...

Coleman evcon furnace [ 1 Answers ]

I have a coleman evcon direct vent forced air furnace, the air is blowing cool air, everythinig else is working it's firing ,the fan is working

Coleman Evcon furnace will not kick on [ 4 Answers ]

My daughter has a Coleman Evcon furnace in her mobile home. The problem is that every morning they wake up it is cold inside because the furnace failed to kick on during the night. She says it seems to work well during the day, however. Please help.

Coleman Evcon Furnace igniter [ 1 Answers ]

We have had to replace the igniter in our furnace at least 4 times in a little over a year. What could be making them burn out? We had two go out in just one weeks time! This was 12-25-07. We had a new one installed late April of this year so it wasn't used that much. We turned the furnace on last...


View more questions Search