Not your question?
  Ask your question
  View similar questions
   
  
 Add your answer here.Check out some similar questions!
Coleman evcon furnace
 [ 5 Answers ]
 My home has coleman evcon furnace 12 years old.I can set the thermostat at 74 degrees and the furnace will start with a 30second purge then the ignitor will warm up and glow red then the main burner lights.then the burner stays lit and the blower runs for a couple minutes. Then the thermostat calls... 
Coleman Evcon electric furnace
 [ 2 Answers ]
 I have a Coleman Evcon electric furnace in a mobile home I rent. Recently a wire had burned off which caused it to produce no heat. After they sent a repair man to work on it I now seem to not have as much air force coming out of the registers. Also it takes 20 minutes to raise the temperature one... 
Coleman Evcon Furnace igniter
 [ 1 Answers ]
 We have had to replace the igniter in our furnace at least 4 times in a little over a year. What could be making them burn out? We had two go out in just one weeks time! This was 12-25-07. We had a new one installed late April of this year so it wasn't used that much. We turned the furnace on last... 
Coleman Evcon electric furnace
 [ 1 Answers ]
 How do I know or rather how can I check to see if the repairman cut off one of the heating elements and where are they located? 
Centrifugal- Won't come on Coleman-Evcon Furnace-
 [ 2 Answers ]
 
Hi, Just found your site today-yipee! I have a problem with my Coleman-Evcon furnace (it has had A/C added)-just bought the house this year, but previous occupants said all was working before. When I turn on the heat on the thermostat, I get a code 3 readout, "Centrifugal Swithch Open"; I had... View more questions Search 
  |