American standard furnace problem

Check out some similar questions!

I have a American standard 90 plus furnace that will not light. [ 1 Answers ]

I have changed the draft motor I'm not getting any suction to pull in the pressure switch could it be the heat exchanger. If I suck in the pressure switch it lights up.

American standard furnace wiring [ 1 Answers ]

I re installed Amercan Standard transfer, I got 24 volts, just need to know that the wiring of the front and back is correct. The model number is GUF120DE3

American Standard furnace will not light [ 1 Answers ]

I have an American Standard furnace with an automatic ignition that will not light. I have done the steps of shut off power, turn off thermostat, turn gas control switch to OFF then everything back on but it still won't ignite. I checked at the gas control switch with a meter and there is no...

Old American Standard shower diverter problem [ 3 Answers ]

I rebuilt my 50 year old Am. Standard tub faucets (3 knob system), including repacking the diverter stem. Everything came out fine except for the (existing) diverter stem, which now won't fully shut off the shower flow. Instead of just turning 1/2 turn and stopping, the handle keeps turning...

American standard furnace [ 3 Answers ]

I have an American Standard Freedom 80 Single Stage downflow gas furnace, Model #DD060C936F. I noticed it is blowing cold air after a power failure, the error light blinks 4 times. I opened the panel I saw the ignitor lit but burner won't come on. After a week it's working pefectly fine for a...

View more questions Search

Check out some similar questions!

Add your answer here.