Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
American Standard furnace will not light
[ 1 Answers ]
I have an American Standard furnace with an automatic ignition that will not light. I have done the steps of shut off power, turn off thermostat, turn gas control switch to OFF then everything back on but it still won't ignite. I checked at the gas control switch with a meter and there is no...
American standard furnace
[ 3 Answers ]
I have an American Standard Freedom 80 Single Stage downflow gas furnace, Model #DD060C936F. I noticed it is blowing cold air after a power failure, the error light blinks 4 times. I opened the panel I saw the ignitor lit but burner won't come on. After a week it's working pefectly fine for a...
American standard furnace thermostat wiring
[ 1 Answers ]
Ijust purchased a new furnace, an American standard with Intell Ignition control (50A65-476). I am only using it as a furnace, no heat pump or air. The old furnace used a two wire thermostat. The new control has twin-Y-W-R-G-C. Which do I need and which if any need to be jumped to use the furnace.
Wiring humidifier to American Standard furnace
[ 2 Answers ]
I have an American Standard freedom 90 comfort R furnace model AUY080R9V3W5 which is a high efficiency 2 stage with dc motor. An Aprilaire 550 humidfier is hooked up to it. The humidifier only comes on if the furnace is on stage 1. It stays off if it kicks into stage 2. The thermostat is a top of... View more questions Search
|