 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replaced switch to air tank still not working, what next?
The pressure in my air tank keeps dropping from 60 to 0, sometimes tapping on pumptrol box would get pressure back. But now it's not working at all. I turned off breaker, opened the box and dusted the connecters. It came back on. But got home and now it's back to no pressure! What should I do next?
Replaced switch and is still not working? What should I do next? |
||||
Check out some similar questions!
I checked the pumptrol switch and the connectors were corroded, so replaced the switch. It is still not working, does that mean its something wrong with my well? Or what do I do next?
When I tap it with my finger the gage fluxtuates up and down. I have limited knowledge and experice with usinga drilled well.
We have a 30/50 pressure switch we replaced along with the gauge it seems to be working OK but then it stops it will click on after reaching 30 and click off at 50 and then all of a sudden it drops to about 12-15 we had a plumber come out and he said to turn off pump and let water build for few...
Replaces a well pressure tank with a New WellSaver 36 pressure tank and now have a lot of air in system. What is the issue of air in the system, even after repeated air bleads?
My Goodman Gas Furnace diagnostic light indicates a faulty air pressure switch or restricted air supply vent. Vent appears clear, vent motor assembly works. I replaced the air pressure switch but the diagnostic light still indicates the same problem. Is there a reset switch or means of resetting...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
