Ask Experts Questions for FREE Help !
Ask
    detox's Avatar
    detox Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 2, 2011, 04:41 PM
    How do I test to see if the air gage on my holding tank for my well is working?
    When I tap it with my finger the gage fluxtuates up and down. I have limited knowledge and experice with usinga drilled well.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Jan 2, 2011, 07:18 PM

    Gauges are cheap. Just replace it. The fact that it moves when you tap it just says replace it.

    Shop ProPlumber Pressure Gauge at Lowes.com
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Steps to add air to well water pressure holding tank [ 7 Answers ]

My water tank is water logged and short cycling. I know I need to add air but I don't recall the exact steps and I don't want to damage the system. I think I have to turn off pump.. drain water until the tank is about half full and the air nozzle is above water level... use air pump to add air...

How do I fill my well holding tank with air? [ 5 Answers ]

I have low water pressure and have been told I need to bleed my holding tank, how do I do this?

How do I adjust the pressure gage on my water tank? [ 2 Answers ]

Do I need to install a jet pump, a pressure tank and a holding tank? [ 6 Answers ]

I have a new home with nothing but the 1inch well pipe stemed through the cellar wall. My house is not on town supply line. Do I need to install a jet pump that goes to the pressure tank which then sends water ot a holding tank? Or is the pressure tank by itself all that I would need? Or a...

Need to change pressure gage on water tank. [ 2 Answers ]

My old gage has some water on the inside of the dial,and I need to change it. There's no shut off valve on the line coming in from the water pump to the tank so ill have to turn the pump off and drain the tank to replace the gage. I believe my tank has an air bladder because there's a valve on top...

View more questions Search