I replaced the switch to the air tank and it still does not work! What next?

huertasub Posts: 5, Reputation: 1

New Member

Jun 17, 2011, 10:14 AM

I replaced the switch to the air tank and it still does not work! What next?

I checked the pumptrol switch and the connectors were corroded, so replaced the switch. It is still not working, does that mean its something wrong with my well?
Or what do I do next?

Check out some similar questions!

Low, fluctuating water pressure with Craftsman Captive Air Tank and Pumptrol switch. [ 0 Answers ]

Hi - wondering if any of you guys can help me out. Bought a house in MD 6 months ago with well and septic. Was vacant for 2 years before we moved in last winter. Have a Craftsman 390.291758 Captive Air Tank in the basement with a Pumptrol switch. Specs say the Pumptrol default setting was...

Air water lines and well pressure switch newwont adjust bladder tank seems fine [ 6 Answers ]

Switch that turns pump on and off

Well Pressure Tank replaced w/WellSaver 36 - Lot's of air [ 6 Answers ]

Replaces a well pressure tank with a New WellSaver 36 pressure tank and now have a lot of air in system. What is the issue of air in the system, even after repeated air bleads?

Replaced chandelier, light stays on switch does not work [ 1 Answers ]

I replaced a chandelier. Ceiling box had 3 black wires tied together, 3 white wires tied together, one red wire capped, and two ground copper wires tied together. The new light fixture had one white and one black wire. I connected the four black wires together and capped, the four white wires...

Replaced air pressure switch [ 1 Answers ]

My Goodman Gas Furnace diagnostic light indicates a faulty air pressure switch or restricted air supply vent. Vent appears clear, vent motor assembly works. I replaced the air pressure switch but the diagnostic light still indicates the same problem. Is there a reset switch or means of resetting...

View more questions Search

Check out some similar questions!

Add your answer here.