Will a luxTs9100 U tstat replace Th52220D1029

budman1970 Posts: 1, Reputation: 1

New Member

Nov 3, 2015, 06:14 PM

Will a luxTs9100 U tstat replace Th52220D1029

I have a mastertrol markII zone controler it had a th5220d1029 thermostat,I do not have original wiring diagram and tstat ripped of wall can I replace it with a Luxts9100U thermostat

Check out some similar questions!

Replace York Tstat with Honeywell - T wire? [ 11 Answers ]

I have seen many Tstat questions but couldn't find any relating to the T wire. I currently have a heating AC unit (York) that is a heat pump with Tstat number 2TH11704024. I tried replacing the York with a Honeywell RTH7400 5-1-1 programmable thermostat. Thinking I had checked all the wires I...

Wiring from old ruum tstat to hunter tstat [ 7 Answers ]

https://www.askmehelpdesk.com/attachment.php?attachmentid=20991&stc=1&d=1245520740 https://www.askmehelpdesk.com/attachment.php?attachmentid=20992&stc=1&d=1245520740 First pic is my old tstat - I believe it is a heat pump. (note that orange wire and gray wires are not used, E and W2 are...

Change from Honeywell heat, and Carrier AC tstat's to LUX tstat [ 7 Answers ]

OK, here is the equipment: 10 yr old Carrier A/C unit with Carrier non-programmable tstat with available connections: DO NOT USE R Y/Y2 G C W/W1

Switching from Rudd tstat to hunter tstat [ 1 Answers ]

I have a single stage heatpump. I changed the tstat out yesterday to a new hunter manual tstat, worked fine last night. Came home from work today and it was very hot in the house,only the fan was running. Now the outdoor unit will not come on at all. I am wondering if there was a mix up when wiring...

TSTAT wiring [ 2 Answers ]

I am replacing a Robertshaw 9520 TSTAT with a Carrier TSTATCCREC01. The current wiring on 9520 goes to these terminals. W2 has only a jumper. R, Y1, O, G, E, C, And a jumper from W2 to E. The carrier terminals are as follows:

View more questions Search

Check out some similar questions!

Add your answer here.