Ask Experts Questions for FREE Help !
Ask
    Alabama1983's Avatar
    Alabama1983 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 9, 2014, 09:04 AM
    Sidewall power venter troubleshooting
    My sidewall power vent is making a loud noise, similar to that of an old bathroom vent fan. Does it need replacing or just serviced? Thanks
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Apr 10, 2014, 01:00 PM
    We couldn't tell you that without being on the job...just not helpful to guess on this for you. Depending on the age of the unit it may be salvageable, but then again, you just don't know! Contact a local service person and have them look at it. Another option would be to call the manufacturer of the boiler (or water heater or furnace) and talk with their tech. service department...they should be able to tell you more. If you choose to call the manufacturer have the MODEL# and the SERIAL# of the unit handy...it is the first thing they ask for, OK?

    Mark
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #3

    Apr 10, 2014, 06:06 PM
    From what I'm reading, I presume this power venter is not a part of the appliance but is mouted external to it. Is that correct? If so, do you have a make & model of the venter? Pictures are always welcome & can often help a lot.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Power venter troubleshooting vac swich tube pluging why [ 1 Answers ]

System running at 85%eff draft 0 - 05 smoke 0 co2 11 temp 300f the swg power venter isswg-4hds the vac tube plugs after 65 days any ideas

Test Gas Furnace with BYPASS of Power Venter... [ 0 Answers ]

I have a teledyne gas furnace with a power venter... my pilot is lit but main burners aren't kicking on. I was thinking that my power venter isn't working properly and was thinking of doing a quick test with a bypass of the power venter. There are two wires to the gas valve that it attaches to, I...

The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman. [ 8 Answers ]

FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S

Quieting a sidewall vent [ 1 Answers ]

My neigbhor installed a high efficiency furnace using sidewall venting with 3" PVC pipe. The pipe is about 3 feet off the ground and terminates with a 90 degree elbow pointing directly at my house (patio area). The problem is that the vent emits a high pitched whistle when the furnace is running...

My Power Venter gives me problems [ 1 Answers ]

I have a sidewall power venter for my furnace instead of a chimney and each year I have times when the power venter does not come on, therefore the furnace does not come on. I have had people in to look at it and they recommend removing it since they claim it is not necessary for my particular...

View more questions Search