Ask Experts Questions for FREE Help !
Ask
    openup01's Avatar
    openup01 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 18, 2013, 03:58 PM
    Boiler
    Hi
    Had a knew Valliant boiler installed about 6 weeks ago... 2 weeks got up in the morning and no hot water or heating.. rang engineers who installed the boiler... told me to reset the boiler... over the telephone... now the radiator in the front room does not work and went to put the hot water tap in the kitchen on and just a trickle of hot water comes out the hot water tap, then hot water completely stops running?
    Engineer is returning in the morning who installed the boiler... anyone got any advice?
    Is it the boiler?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 18, 2013, 04:17 PM
    Do you get a good strong flow of cold water from the cold tap?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The back boiler from our solid fuel boiler is not heating the water in the cylinder [ 0 Answers ]

Our back boiler heats the water via the open fire. Lately the water is slow to heat in the cylinder and the pipes leading into the tank are extremely hot but the cylinder eventually heats but totally to the bottom of the tank. Would the back boiler be leaking or just full of gunge from 19 years of...

Repco boiler model #LA150c pressue in boiler too high [ 1 Answers ]

Pressure rellief valvue was replaces a year ago for laking. Water pressue still reaching 40psi? Don't know why shoud be 30psi.. water still leaking off from the pressure relief valvue. I've tried to beeed oof water from the pressure relief valvue and the drain with n help. Pressuet still moves...

Spark ignition gas boiler Weil McLain pilot lights but boiler doesn't s [ 2 Answers ]

Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.

Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump [ 0 Answers ]

I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.

Connecting a wood boiler to exsisting boiler [ 2 Answers ]

I need a plumbing diagram to connect a wood burning boiler to an exsisting primary boiler, exsisting boiler is apeerless 105/85 that is approx. 20 years old

View more questions Search