 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The back boiler from our solid fuel boiler is not heating the water in the cylinder
Our back boiler heats the water via the open fire. Lately the water is slow to heat in the cylinder and the pipes leading into the tank are extremely hot but the cylinder eventually heats but totally to the bottom of the tank. Would the back boiler be leaking or just full of gunge from 19 years of constant fires?
|
||||
Check out some similar questions!
Hi I have a comi boiler the boiler is kicking in but I have no heating and no hpt water what could be wrong?
I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.
How often do I need to flush the boiler and add boiler treatment to the system to expand the life of the boiler from expensive replacements? I just did the flushing in Dec 2005, and I just have a plumber in to inspect the furnace condition, they changed the gas value and when I ask them when I...
Hi, Our boiler has started to act up on us. I had the heating on constant the other day. I was up in the bathroom and heard a strange sound coming from the boiler. I ran the hot tap to wash my hands and the water spurted out and it was brown in colour. The boiler had locked out. I tried...
I have a zoned in floor hot water heating system that is hammering. The system hammers in the boiler when I have only one zone on. When more than one zone calls for heat, then there is no hammering. * I have installed spiro vents to remove all of the air. * I have checked the pump, and it is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
