Ask Experts Questions for FREE Help !
Ask
    romeo511's Avatar
    romeo511 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2013, 09:48 AM
    Goodman furnace problems
    I have a goodman furnace but I seem to have misplaced the tag that was inside the furnace letting me know the model number of the furnace. I treid calling the company and they have no way of finding it and I don't believe the previous owner registered the furnace when it was installed. Is there any way to find out what that model number is since the tag is lost?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jun 25, 2013, 10:03 AM
    Slim... very, very slim... You've have to find a guy that's serviced and installed 100's of that model, and find him to identify it from memory. And even then there are usually changes in the system mid run for a given model where a Serial number would be needed to identify the correct parts.

    Why was the tag even removed..
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace problems [ 21 Answers ]

Hi - I have a Goodman GPM furnace. It works intermittently. I replaced breaker, thermostat, Control board and surface igniter. All appears well on start up sequence ; blower runs and igniter heats up and then turns off as no gas comes out. Control board codes says OK. Can anybody recommend what to...

Goodman furnace problems [ 1 Answers ]

I have a Goodman GMNT080-4 gas furnace. It stopped working and in checking it out, the control board was corroded, due to moisture ,and some of the dioids ends were rusted and broken from the sodder . I replaced the control board (B18099-13), but it still would not work. I have power to the board,...

Goodman furnace problems [ 1 Answers ]

The system comes on, the igniter glows, the burners light, and the fan comes on. Why does my system cycles on and off? The error code is for 4 flash. I replaced the limit switches. The system still cycles on and off. Why?

Goodman furnace problems [ 3 Answers ]

Goodman furnace won't come on light blinks 6 times and the blower motor run continueous.

Goodman furnace problems [ 3 Answers ]

Son in law has a Goodman natural gas furnace. No heat. LED is flashing 4 times ('Upper limit open' is the message associated with this error). The blower motor turns on, the exhaust motor (I think that's what it is) turns on for about 10 seconds then turns off. Tried changing the air filter (was...

View more questions Search