Ask Experts Questions for FREE Help !
Ask
    Savingmoney's Avatar
    Savingmoney Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 16, 2013, 11:37 AM
    Goodman furnace problems
    The system comes on, the igniter glows, the burners light, and the fan comes on. Why does my system cycles on and off? The error code is for 4 flash. I replaced the limit switches. The system still cycles on and off. Why?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Jan 16, 2013, 08:26 PM
    What does 4 flashes on a Goodman mean according to the flash code key on the furnace?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace problems [ 21 Answers ]

Hi - I have a Goodman GPM furnace. It works intermittently. I replaced breaker, thermostat, Control board and surface igniter. All appears well on start up sequence ; blower runs and igniter heats up and then turns off as no gas comes out. Control board codes says OK. Can anybody recommend what to...

Goodman furnace problems [ 2 Answers ]

I have a Goodman model CAPF1824B6BA that will not ignite. The LED flashes 3 times which the code states a pressure switch stuck open. Is this something I can correct or do I need a new part. The exhaust fan and blower fan work but no ignition.

Goodman Furnace Problems [ 3 Answers ]

Hi My Furnace Starts and everything then it stops, then it repeats this process over and over what's wrong with it? I have a Goodman furnace, its relatively new the house was built in 2002. Please help it just snowed! IM FREEEZING :( what's wrong with it is it the ignition lighter thing?

Goodman furnace problems [ 3 Answers ]

Goodman furnace won't come on light blinks 6 times and the blower motor run continueous.

View more questions Search