Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace problems
[ 21 Answers ]
Hi - I have a Goodman GPM furnace. It works intermittently. I replaced breaker, thermostat, Control board and surface igniter. All appears well on start up sequence ; blower runs and igniter heats up and then turns off as no gas comes out. Control board codes says OK. Can anybody recommend what to...
Goodman furnace ignitor problems
[ 7 Answers ]
Having an issuse with my goodman furnace. Ignitor turns red, flame comes on, and then goes out. Ignitor will head up again, flame on, and then off. THis repeats. I've taking off the sensor and cleaned it to a sparkly new look. Taken the burner housing out and cleaned them individually of all...
Goodman furnace problems
[ 3 Answers ]
Son in law has a Goodman natural gas furnace. No heat. LED is flashing 4 times ('Upper limit open' is the message associated with this error). The blower motor turns on, the exhaust motor (I think that's what it is) turns on for about 10 seconds then turns off. Tried changing the air filter (was...
3 yr old Goodman Gas Forced Air Furnace problems
[ 10 Answers ]
If thermostat is set to 70-90 degrees the furnace burner and blower will run constantly and the temp never gets above 68 degrees in the house. I have a Lux programmable thermostat and was thinking of replacing it with a Honeywell. I have a new filter. Any ideas? The weather has been in the... View more questions Search
|