 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I own a hair salon and I have a Goodman furnace near the ceiling (small attic), and the guys I contracted have been replacing the flame sensor every two months because it turns off the burners. Are they installing correctly or is this common? If not, what do you think is the problem? What can we do...
I have an old American Standard gas furnace that the burners continue burning on even after the heat reaches the desired setting on the thermostat. If I turn the furnace to the pilot setting the burners go off, If I turn it back on the burners come on even if it is 80 degrees in the room and the...
Blower won't run, even in on mode, replaced stat, still nothing, has power to motor, can turn cage freely, furnace led light says system normal, compressor for air comes on, heat ignites, just no fan blower, any ideas
I have a york 90%+ furnace it is two stage the burners cycle on and off twice before the call for heat is complete ,is that normal?
I have a new motor, thermostat is only a year and a half old, heat comes on, burners won't stay lit. Getting faint heat from vents on first floor level of house
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
