 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have an old American Standard gas furnace that the burners continue burning on even
I have an old American Standard gas furnace that the burners continue burning on even after the heat reaches the desired setting on the thermostat. If I turn the furnace to the pilot setting the burners go off, If I turn it back on the burners come on even if it is 80 degrees in the room and the thermostat is turned back as far as it will go. I thought it might be the thermostat so I changed it and still get the same results.
|
||||
Check out some similar questions!
I have an 10 year old armstrong natural gas furnace which goes through the ignition cycle, everything seems fine for a few seconds, then the burners shut off. I have tried cleaning the flame sensor, didn't work. So then I replaced flame sensor- same problem. I just looked at the pressure sensor,...
I have an American Standard Freedom 80 Single Stage downflow gas furnace, Model #DD060C936F. I noticed it is blowing cold air after a power failure, the error light blinks 4 times. I opened the panel I saw the ignitor lit but burner won't come on. After a week it's working pefectly fine for a...
My american standard gas furnace fan keep blowing after it reach it's desired temperature.
I am trying to decide which furnace I should replace my existing furnace with a Keepright Furnace or American Standard Furnace? Both are there Higher End Furnaces. Please Advise
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
