Ask Experts Questions for FREE Help !
Ask
    benita99's Avatar
    benita99 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2012, 05:25 PM
    My furnace will not do anything. The induction fan was running continuously
    My furnace is not running. The induction fan was running contiuously and then I change the sensor for it and now it is doing noting. I have a concord furnace. I tried to jump the thermostat but nothing happened
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Sep 25, 2012, 05:32 PM
    What sensor? Do you mean you changed the pressure switch? If so, how many wires hook to the pressure switch? Lots of options here. Let me know more about your problem and we will see what we can come up with.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Honeywell CT3200 - fan continuously running [ 2 Answers ]

I just noticed that regardless of whether the FAN switch is in the AUTO or ON position, the fan is continuously running. It just started to do this, this past week, up until now it was fine, only running when the furnace kicked in. When I turn the SYSTEM switch from HEAT or COOL to OFF, it...

Heater fan running continuously [ 3 Answers ]

My heater fan will not shut off. Pulled thermostat off the wall and fan continues to run. Any answers are gratefully appreciated. So, update: We pulled the red wire off thermostat, and fan still keeps running. The only way to shut it off is at the furnace itself. But that turns whole system...

Furnace induction fan constantly runs [ 0 Answers ]

I have a Bryant 395B and the induction fan constantly runs, it doesn't matter if the AC is on or the heat. There was a new blower control board replaced recently (the main blower wasn't working, now it is). I have tried cutting the power and turning it back on, the inducer fan just comes back on...

Water Heater Exhaust Fan Running Continuously [ 0 Answers ]

I have a problem with my Kenmore power vent gas water heater: 40 Gal. Power Miser 8 and the model number is 409.737945. The problem is that the exhaust fan has been running continuously for two days, even the gas burner is off. I have checked the air pressure switch it seems okay. What else...

Using the furnace blower fan continuously [ 3 Answers ]

Please let me know if it is more efficient to have the blower fan on continuously rather than in the automatic position. If so, does it make a difference in heating mode or AC mode?

View more questions Search