 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water Heater Exhaust Fan Running Continuously
I have a problem with my Kenmore power vent gas water heater: 40 Gal. Power Miser 8 and the model number is 409.737945. The problem is that the exhaust fan has been running continuously for two days, even the gas burner is off.
I have checked the air pressure switch it seems okay. What else can it be wrong? Any help would be greatly appreciated. |
||||
Check out some similar questions!
I just noticed that regardless of whether the FAN switch is in the AUTO or ON position, the fan is continuously running. It just started to do this, this past week, up until now it was fine, only running when the furnace kicked in. When I turn the SYSTEM switch from HEAT or COOL to OFF, it...
Bathroom fan kept on running, timer switch didn't make any difference. This is what I did. 1) Turned the power off from the circuit borad. 2) Removed the timer switch, had Black and Red wire, taped them 3) Turned the power on from the main 4) Fan started and didn't stop. Let me know,...
The fan on the thermostat continuously runs, even if it's set on "auto". I have to shut off the main switch in order for it to shut off. But once the air kicks on, the fan stays on until I flip the main switch again. Also, the error code on the main board reads Reversed 115 VAC polarity... any...
I have a GE exhaust fan with a heater and light.there are two cables one on each side of the fan housing unit In one cable there are two wires(black and white) In the other cable there are three wires(red,black and white) The fan wire connection box has seven wires(three white,one red,one black,one...
Hello, I have noticed that the exhaust fan constantly blows on my State Select Propane Water Heater. Is this normal, or should it only come on when the water heater is actually heating? Thanks,
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
