Ask Experts Questions for FREE Help !
Ask
    dennylee's Avatar
    dennylee Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 26, 2012, 04:47 PM
    Can lobes on a cam for briggs and stratton be changed
    Are the lobes on the camshaft on a briggs and stratton 17.5 hp changeable
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 26, 2012, 05:31 PM
    I would say no, typically the unit is ground in 1 piece. If one is worn down, you need to replace the camshaft.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I changed out a 13hp with a 16man hp briggs&stratton! [ 1 Answers ]

I changed out a 13hp hp briggs&stratton with a 16man hp briggs&stratton! The 13text hp only had a yellow wire coming out from behind the started witch plugged into a box mounted on the side of the motor, the box also had a red wire coming out of it going to the cylinoid. The 16box hp did not have...

Wiring 14.5 hp briggs and stratton riding mower from 18 hp briggs [ 1 Answers ]

How do you wire 14.5 hp briggs and stratton riding mower when changing it from a 18 hp briggs?

Changed injectors,cam and crank sensor but hard to start [ 2 Answers ]

Will not start when its cold

I just replaced the cam in a briggs and stratton 15hp ic and it won't start have adjus [ 0 Answers ]

I have a briggs & stratton 15 hp model #281h07 fly wheel key sheared off causing the engine to backfire then blowing the govenor and a part of the cam . I replaced the fly and cam and the gov and it won't start seems to be spinning OK but won't kick . What way does the flywheel rotate and have I...

Briggs & Stratton 98902 - realigning cam shaft [ 1 Answers ]

I have a Briggs & Stratton 98902 and I removed the sump and the cam shaft fell out. How do I realign the cam shaft? Thanks in advance, Kevin

View more questions Search