Ask Experts Questions for FREE Help !
Ask
    Chester2000's Avatar
    Chester2000 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 17, 2007, 03:00 AM
    Briggs & Stratton 98902 - realigning cam shaft
    I have a Briggs & Stratton 98902 and I removed the sump and the cam shaft fell out. How do I realign the cam shaft?

    Thanks in advance,

    Kevin
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
    		  
    #2

    Nov 17, 2007, 05:55 AM
    You have to look closely, but there is a mark on the camshaft and the crankshaft gears, align them together.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

18.5 hp briggs & stratton [ 9 Answers ]

I have a 18.5 hp Briggs & Stratton model # 31P777, type # 0348-E1 that is blowing oil out of the screen on the fuel pump. It will blow out about 1 pint by the time I finish cutting my yard. Any ideas?

Briggs & stratton 12.5 [ 8 Answers ]

My husband has an MTD with a b and s 12.5. It has run weill with some babying for a while, now. One day he was running ti and he heard a loud POP , and that was the end. It has new solenoid, starter, bettery and a few other things . The key is it is GETTING gas into the bowl, but not going ...

4.5 briggs & stratton [ 3 Answers ]

My lawn mower starts & revs up and down on a full tank,and when almost empty runs well!

Briggs & Stratton 3.5hp Model 98902 [ 2 Answers ]

I have a Bolens Edger with a 3.5 Vertical Shaft Briggs which I purchased used with this problem: After priming the carb, the motor will start (it may take a couple of tries to keep it running) Once it keeps going, the engine seems to oscillate (revs up and dies down, revs up and dies down...

View more questions Search