 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I just replaced the cam in a briggs and stratton 15hp ic and it won't start have adjus
I have a briggs & stratton 15 hp model #281h07 fly wheel key sheared off causing the engine to backfire then blowing the govenor and a part of the cam .
I replaced the fly and cam and the gov and it won't start seems to be spinning OK but won't kick . What way does the flywheel rotate and have I missed something all has been taken napart 3 times to make sure it all is in order. Can someone please help the grass is so long. Thanks pete |
||||
Check out some similar questions!
I'm rebuilding the engine on my murray, it's a 12.5 horsepower power built. I have a brand new starter and the solonoid was replaced about a year ago, but it just clicks when I turn the key, if I hook up the starter and try and turn it over the solonoid clicks multiple times rapidly then won't...
Hi,can anyone help me,my neighbors cox stockman 13hp ride on won't start. I've replaced the solinoid, charged the battery and checked all the wiring,it still won't start,not even a click when I turn the key, my neighbor said it did turn over once yesterday then nothing,dead.I have also checked the...
What are the valve adjustment specs on a 15hp I/c briggs& stratton with ohv? Thanks
I was mowing the lawn a couple of days ago and the engine just died on me. I have good spark. I bought a new fuel pump and installed it but still no luck. I can squirt some gas in the carb and it will start right up, then die back off as the gas is used up. There is plenty of gas going through the...
I have a tractor mover with a Briggs & Stratton 15hp, it runs good at lowest speed only, unless I put it at full speed and full choke, it backfire out the muffler and shuts down at any other speed. I ran through the carb, seems clean unless I missed something, the float was stuck and it would...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
