Ask Experts Questions for FREE Help !
Ask
    Butternauts's Avatar
    Butternauts Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2012, 02:43 PM
    I keep blowing fuses on my toshiba TV
    I changed outlet same thing. Everything looks good on the board nothing looks burnt or fried
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 26, 2012, 06:14 AM
    May not be something you can't see, you could unplug other boards to maybe isolate the board with the shorted component. You will need a Meter. Not all Capacitors bulge when they fail. Finding a bulging cap may be the problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Blowing Fuses [ 2 Answers ]

I have a John Deere L110. It will start but blows fuses? What could be the problem?:(

Blowing fuses [ 1 Answers ]

Hi I have a intertherm furnace model #FEHA-017HAC-01 with a fuse "panel" 2-30 amps and 2-60 amps the 60 amp fuse on one side burns out about every week or so I also notice the disconect "plug" is getting hot on this burnt fuse side as it is starting to discolour and deforme melted any suggestions?

Fuses blowing [ 2 Answers ]

Hello. I hope someone can help me. I have a 38” Weed Eater riding mower with a 12.5 hp Briggs & Stratton engine. I keep blowing the 30 amp fuse that is located right next to the battery. I can change out the fuse with a new one and the mower will fire right up and run great. I am not sure at...

Blowing fuses [ 1 Answers ]

York heat pump,Have cold air all summer,fan alone runs fine,emergency heat works great,But when you turn it to heat only it will blow fuse,could it be a control board on the inside... Thats what I'm being told now.. by a service tech... By the way THANKS for the help so far... Heater coils have...

Blowing fuses [ 1 Answers ]

Had new thermostat installed,most everything on this york unit has been checked,couldn't find a problem,boards,contacts,relays all checked out to be fine,still blowing 5 amp fuse when calling for heat??

View more questions Search