Ask Experts Questions for FREE Help !
Ask
    honeywellEW07's Avatar
    honeywellEW07 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2007, 07:05 PM
    Blowing fuses
    Had new thermostat installed,most everything on this york unit has been checked,couldn't find a problem,boards,contacts,relays all checked out to be fine,still blowing 5 amp fuse when calling for heat??
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Dec 5, 2007, 07:17 PM
    Remove wires to heat contactor coil, if it blows, maybe shorted windings. Also verify no load when coil(control) wires are removed. White wire is sometimes used for heat.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray keeps blowing fuses [ 1 Answers ]

I have a 12.5 horse power Murray Riding Mower. I had problems getting it started this year. Found a blown fuse. But after I replaced it and cranked it up one time. Now the fuse is blown again. What is causing this?

Riding mower keeps blowing fuses. [ 2 Answers ]

I have a Cub Cadet LT1024 riding mower that keeps blowing the fuse. As soon as I turn the key it blows the fuse. I replaced the fuse and it smoked from under the flywheel and then blew the fuse. I replaced the fuse and unpluged the 2 wires that go up under the flywheel and turned the key on and it...

Fuses blowing [ 2 Answers ]

:confused: My clothes dryer started blowing fuses. Since it was a 1964 model, we assumed it was on it's last legs and bought a new one. The new dryer is also starting to blow fuses. The dryer is on a separate fuse box from everything else. Nothing has changed where the dryer or fuse box was...

View more questions Search