 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
2007 kenmore elite quietpak he4 dryer
We paid out the nose for the 2007 kenmore elite quietpak he4 washer and dryer. Thank goodness (?) the washer failed before our 3 year purchased warranty ran out - mother board failure. The dryer started acting up shortly thereafter, but I attributed it to ambient temps and humidity, laundry room size, but I was wrong. The vent ducting is clear and the exhaust output is strong - but the heat is minimal at best - must use the 20 minute "touch up" cycle over and over and over again, because none of the other settings last more than 15 minutes. Any ideas about this problem?
|
||||
Check out some similar questions!
Had this dryer for over a year before I went to use it and I had no lights on the front panel at all. Couldn't even set the cycle nor turn the unit on! I had a repair manual which was prtetty self explanitory: (if step 1 did this, than go to step three. If step three doesn't work, then such & such...
We have a Kenmore Elite Smartheat Quietpak 9 Dryer and the control is stuck on Casual. I can push another setting but it comes back to Casual. I can't change any of the other settings either (like the time or temp). I tried unplugging it for 45 minutes and it didn't reset. Anyone have this...
I just brought home a brand new Kenmore Elite HE4 Dryer and it will not turn on.
This unit has had numerious problems, I have repaced the pwr supply twice now the unit is displaying a power failure and will not reset by pressing the start button which is what the manual tells you to do. God any suggestions on what to do?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
