Ask Experts Questions for FREE Help !
Ask
    zorrow's Avatar
    zorrow Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 4, 2008, 10:43 AM
    Kenmore elite HE4 dryer
    This unit has had numerious problems, I have repaced the pwr supply twice now the unit is displaying a power failure and will not reset by pressing the start button which is what the manual tells you to do. God any suggestions on what to do?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    May 4, 2008, 11:40 AM
    Verify you have power to the outlet.Then check the door switch and thermal fuse. If either is bad you will get these symptoms
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore elite dryer [ 2 Answers ]

The dryer does not heat up. I replaced the heating element, it still does not heat up when turned on? Any clues to what it could be?

Kenmore Elite Dryer [ 1 Answers ]

Dryer start button need to be held down to keep dryer running. Why?:confused:

Kenmore elite dryer [ 4 Answers ]

My kenmore elite dryer is not getting hot what could be the problem? I was thinking it may be the heating coil, if so where would it be located? Any other suggestions?

View more questions Search