Ask Experts Questions for FREE Help !
Ask
    TCCIOWA's Avatar
    TCCIOWA Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 7, 2012, 01:30 PM
    Can Thermostatic Mixing Valve be revesed?
    I would like to control the flow of hot water to the dishwasher.
    I want to drain the initial cold water and send the hot water when it gets hot enhough through to the dishwasher.
    Can that be done with standard Thermostatic Mixing Valve?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Mar 7, 2012, 02:18 PM
    No that valve is to prevent scalding. Watts and other make a hot water recycling system that might do what you need. Here is one by D'Mand but its pricey Metlund D'MAND Systems
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Mar 7, 2012, 03:37 PM
    Why not run HW to the DW all the time? It helps preheat the DW and keeps the wash temp up. Reducing temp for a DW is not a good way to save energy costs.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Mar 7, 2012, 03:39 PM
    Ma, I don't think you read this correctly. TCC wants only hot water with no initial cold water which normally lays in the pipe.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #5

    Mar 7, 2012, 06:03 PM
    Must be a long run, mine is hot within30 secs and the heater coil does the rest.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot water problem - faulty check valve or mixing valve? [ 8 Answers ]

Hi, We have a weird problem with hot water running cold in our apartment. At all of the faucets and taps we only get hot water for a minute or two and have to turn off the faucet/tap for 30 seconds and back on again to get hot water. Then the same thing happens again. To get continuous hot...

Thermostatic shower mixer valve [ 3 Answers ]

I have had fitted a thermostatic shower mixer valve but I cannot adjust the temp it is either scalding hot or cold. My plumber said the valve was faulty so I replaced the cartridge but it is still the same. Could it be that if he has connected the hot and cold feeds wrong it would work like this....

My thermostatic shower valve won't work [ 0 Answers ]

I have bought a new shower and have gone for a thermostatic shower valve once connected I turned the water on and am only getting a dribble come out. I tried it without the shower valve and have got water pressure coming out the pipes. I then tried removing the gorse from the washer thinking this...

Are thermostatic mixing valves required in private residences [ 1 Answers ]

Are thermostatic mixing valves required in private residences?

Hansa thermostatic shower valve problem [ 0 Answers ]

I have a Hansa thermostatic shower valve with volume control and recently it started providing very little hot water pressure but plenty of cold water pressure. Do these valves fail all of a sudden?


View more questions Search