Check out some similar questions!
Hansa shower valve
[ 2 Answers ]
I installed a Hansa shower valve in a bath remodel recently. After the tile was installed I installed the trim kit. The deverter does not shift the water from tub to shower. Is this a problem that anyone else has incountered? How much water pressure does it take to make this diverter work...
Shower Valve Problem
[ 1 Answers ]
My shower valve seem slightly different than the one speedball1 has pictured but the information was on the money. After I pulled the retainer clip I had to remove a very small split ring hidden inside the valve body (it was directly underneath the retainer clip). The valve body was stuck pretty...
Symmons shower valve problem
[ 1 Answers ]
Hi, I put a new shower dial and handle kit on. When removing the old handle the stem snapped. It is a symmons. I went to the plumbing store and got a new one. I put it in and now have no hot water or so little it feels cold. This may sound dumb but my hot water flow in all sinks is low pressure...
Replaced Shower valve problem
[ 2 Answers ]
This SHOULD have been simple... I replaced HOT and COLD valves and the DIVERTER on 2 showers. They were old and needed to go. Great care was taken to match and get the proper replacements. The COLD on each shower works well. The HOT leaks out the center post a bit in each shower. The... View more questions Search
Add your answer here.
|