 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My thermostatic shower valve won't work
I have bought a new shower and have gone for a thermostatic shower valve once connected I turned the water on and am only getting a dribble come out. I tried it without the shower valve and have got water pressure coming out the pipes. I then tried removing the gorse from the washer thinking this was blocking it but no change. Has anyone come across this before please help.
|
||||
Check out some similar questions!
I have a Myson Midas Combi boiler and a thermostatic shower. I haven't got any problems with the central heating or hot water in the kitchen sink, but the temperature of the water in the shower isn't constant. It goes hot then freezing cold soon after, you have to turn the temperature control on...
I have a Hansa thermostatic shower valve with volume control and recently it started providing very little hot water pressure but plenty of cold water pressure. Do these valves fail all of a sudden?
Hi all, My thermostatic shower only has a constant temp which is just above lukewarm! Recently I had to replace the pipe to the shower head as I found the reason the pressure was poor and the shower was too hot was due to a leak in the pipe. Since fixing this however the temp has remained...
My shower diverter valve does not work properly. It allows water to flow from the tub nozzle and the shower head when the diverter is for shower only, when turned to tub only water will come out of tub nozzle like it should, The diverter is a turn valve, I believe compression type, I Purchased...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
