 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
These supporting clips rated for NM cable can be used to support NM cable to steel stud:
Non-Metallic Sheathed Cable and MC/AC Cable Supports Be sure to use insulating bushing when NM cable passes through steel studs. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I'm currently wiring my basement soon which is about 1000 square feet. It will include a family room, a bedroom and a bathroom. I currently have one 15 amp 14/3 circuit running down there connected to one circuit breaker from the main panel. I've calculated that I need a total of 2 15 amp...
Hello I am about to finish the rest of my basement. 2 bedrooms are already completed and were finsihed by my brother-in-law who is now passed away so could not help. I am finishing a family room, a bathroom, and one bedroom. My questions are as follows: 1) When my brother in law finished the 2...
I am getting ready to wire my basement. In the basement there will be 3 gfi outlets, 8 outlets and two ceiling lights. Also in addition to the two ceiling lights in the finished area I want to put two pull chain lights on a switch. My question is will 12/2 wire be heavy enough to wire everything....
I am using metal studs in my basmsnt. I positioned each outlet 18inches on center from floor. I purchased the grommets and am ready to start fishing the wire. Can I use the hole in the stud located 5 inches lower than each outlet location in order to save wire? That is, the next available hole...
View more questions Search
|
