 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore 90series transmission
I took the transmission apart to replace a white plastic gear that costed $89 and after putting it together it works but won't spin and I found out the whole transmission is $135 new on line but I really want to put mine together but how?
|
||||
Check out some similar questions!
Hi there I lose the bolts on my 90 series Kenmore washer transmission to fix my coupler but now the transmission will not push back up to bolt on . What should I do ?
My car Pontiac Sunfire with a 3 speed automatic transmission will not downshift. I already replaced and adjusted the shift cable. It upshifts with no problem and will go as fast as I give it gas. What could the problem be? Thanks!
I have a 14 year old Kenmore stackable unit, spent several hundred dollars here and there every few years to have the dryer belt fixed, etc. Now the washing machine portion, it will start a wash cycle, then stop, leaving the water to sit in the barrell. A repair guy said its not worth replacing the...
I have a Kenmore washing machine (11020092993) that wasn't spinning. I took it apart and found that the coupler was broken. Before I found the problem I had already taken the 3 bolts out that hold the transmission to the bottom. The transmission dropped about an inch but wouldn't come off the...
I have a Kenmore washer 110.82283 that is locked up. It is belt drive that the motor tries to run but the transmission pulley will only rotate about 1 degree with a distinct metallic clunk when I try to rock back and forth manually. I tried to move the bars back and forth that appear to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
