My kenmore washer 90 series transmission will not push back up

foreveryoung77 Posts: 1, Reputation: 1

New Member

Feb 21, 2011, 08:46 AM

My kenmore washer 90 series transmission will not push back up

Hi there I lose the bolts on my 90 series Kenmore washer transmission to fix my coupler but now the transmission will not push back up to bolt on . What should I do ?

Check out some similar questions!

When I push reset on the outlet it keeps popping back out, therefore my washer won't [ 2 Answers ]

What is the capacity of my Kenmore 80 Series Washer & 90 Series Dryer? [ 1 Answers ]

We are trying to figure out what the capacity is of our Kenmore Washer and Dryer that we purchased over 10 years ago in Canada. I can't find it anywhere on the machine or manual. The Model # of the Kenmore 80 Series Super Capacity Plus Washer is 110.4784292, Serial #CH0802766. The model # of the...

Remove back of kenmore 70 series washer [ 0 Answers ]

I can not get the back of my kenmore 70 series washing machine off. The agitator does not work and I want to remove/replace it.

Kenmore stackable washer dryer unit: washer transmission [ 0 Answers ]

I have a 14 year old Kenmore stackable unit, spent several hundred dollars here and there every few years to have the dryer belt fixed, etc. Now the washing machine portion, it will start a wash cycle, then stop, leaving the water to sit in the barrell. A repair guy said its not worth replacing the...

Kenmore Series 70 Dryer - Hums when you push start [ 1 Answers ]

I have a Kenmore Series 70 electric dryer. About 10 years old. Will not start. Hums when you push the start button... and you can smell a electric "burning smell" along with the hum. I disassembled the entire unit last week (when these symptoms started). Everything looked fine... cleaned out...

View more questions Search

Check out some similar questions!

Add your answer here.