 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore stackable washer dryer unit: washer transmission
I have a 14 year old Kenmore stackable unit, spent several hundred dollars here and there every few years to have the dryer belt fixed, etc. Now the washing machine portion, it will start a wash cycle, then stop, leaving the water to sit in the barrell. A repair guy said its not worth replacing the transmission for $600, we could just buy a new unit. And he said even if replacing the transmission, the seal would eventually leak in a short time, since it never quite matches up well once it has been disturbed with the transmission. Now I am looking at throwing out the whole unit, ( including a perfectly good dryer? ) and buying a cheap side by side set of washer and dryer. Any suggestions? Does no one buy a stackable with one good unit working even though the other unit ( washing machine ) doesn't?
|
||||
Check out some similar questions!
I have a Kenmore model 417.98702892 that has developed a tereible squeak. What is the easiest way to replace the felt pad on the drum?
I have a kenmore stackable washer & dryer that when it fills with water it will not agitate it just humes . I took the front off and you can see the motor shaft start to turn but it stops. Is there a simple fix ? THANK YOU
I am renting a condo which has a Kenmore stackable washer and dryer. I try to not stuff too many clothes in the dryer but it seems like I have to run the dryer twice for each load that I put in to it. Is it possible that the heating element is just not as good as it used to be since it's probably...
My Kenmore model # 110.98575100 washer dryer combo will not spin when it reaches the spin cycle unless I lift the lid and close it again. I don't really know how old it is, but it is at least 5 years old. I have replaced the lid switch, but that did not work. It makes a noise like the motor is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
