 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to join laminate flooring to stairs?
How to join laminate floor with stairs, because my stairs are perpendicular to the laminate flooring. So I want to know which way should I start so that towards the stair nosing I have to put nosing side of the plank or groove side of the plank (my stairs are perpendicular to the flooring)
|
||||
Check out some similar questions!
Ok this is or was one of our specialities. With stairs you have the "going" and the "riser" The going, is the flat part, and this overlaps the riser, usually by about 1inch ( 25mm ) Therefore you need to batten out the riser part, just under the bullnose part, and at the bottom of the riser....
Hello. I am trying to use leftovers from my living room and do the laminate stairs. The only thing that I have a problem with are the edges. The only thing that I found available is the aluminum stair edges but the look way too ugly. Also my laminate has underlyer glued to it already so if I...
When attempting to install laminate flooring on our stairs, my husband and I have found that the stair bull nose dose not completely cover the underlying stair. The step is 3/4'” while the bull nose is 3/8”, leaving 3/8” showing. One person suggested that we cut down the part of the step that is...
Installer put new 1/4' subfloor in bathroom last year when installing new Tarkett (vinyl) flooring, with a metal strip transition to existing hall carpet. Now we are installing 12mm laminate in hall, which with underlay, is approximately the same height. However, when the metal strip was removed,...
We are installing laminate wood floors on first and second floors. How should we do the stairs?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
