Ask Experts Questions for FREE Help !
Ask
    david_smith's Avatar
    david_smith Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 8, 2011, 09:41 PM
    Can an electric clutch on a yth2148 Husqvarna lock up in the engaged position
    When trying to start the mower the blades are trying to turn but the starter is not strong enough. When I took the primary deck belt off engine started fine.
    So the clutch is stuck in the engaged position even with the pto switch off. How can I unstick it or what should I try.
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Aug 9, 2011, 04:39 PM

    The bearings in the clutch have locked up , will have to replace clutch ,
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husqvarna mower looses spark sporadically when blade engaged [ 5 Answers ]

My Husqvarna runs poorly when blade is engaged after the engine runs for about 20 minutes. It appears that the electrical is sporadically dying as if the safety switch for the blade is killing the motor briefly then allowing a spark with a loud bang when the spark is restored. It runs fine...

Husqvarna YTH2448 engine stalls when blades engaged [ 5 Answers ]

Good afternoon all, I have a quick question that I am hoping someone can help me with. I have a Husqvarna yth 2448 that stalls when the engine is engaged after running for about 30 minutes. After the mower sits and cools off, it will cut fine again. I checked the seat sensor, not sure if that...

JD 111 mower dies when clutch engaged [ 3 Answers ]

I have a 111 jd riding mower that dies when the electric clutch is engaged. Have cleaned it out and spins freely while mower is running but when I engage the switch it dies. Any help??

160 electric clutch does not stay engaged [ 2 Answers ]

My John Deere 160 Lawn Tractor has an electric clutch. I engage it and it turnes the blades but soon stops and the blades also stop. Is there an adjustment, or some other possible problem, or do I need a new clutch?

Craftsman lawm mower will not move when clutch is engaged [ 2 Answers ]

Craftsman lawn mower model # 917270710 will not move when I release the clutch. This happens in all gears.

View more questions Search