Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
When can you use a main lug only electrical panel
[ 1 Answers ]
I am install a 400 amp 480 volt panel outside a building. It will be fed from a breaker inside. Can this panel be a MLO or does it have to have a main breaker or disconnect.
Connecting conduit to my 200amp main panel
[ 1 Answers ]
My 200amp main panel is outside, it has knockouts on the bottom only,the knockout area is filled up with house circuits and a backup generator.Can I drill a hole and mount a waterproof hub into the side of the main panel,which would allow me to connect conduit to another circuit.
Connecting a sub panel and main panel
[ 2 Answers ]
When adding a sub panel to the main electrical panel, does the neutral bus at the bottom of the main panel have to be removed? If not, are there any specific examples you can offer? Or, should the neutral bus bar be removed at all times? Thanks & happy holidays, Mike
Connecting main panel to sub-panel?
[ 1 Answers ]
I have my sub-panel for my workshop all set up, plugs & lites all wired in. The workshop isn't attached to the house & I was wondering what the best way was to connect from the main panel in the house to the sub-panel in the workshop?
Main Electrical Panel
[ 1 Answers ]
We want to add a deck off our master bedroom. The main electrical box/outside will have to be away from the house it will be in the way. There is no where to move it on the back of our house, too many windows and doors. Were can we move it? How far? Can we attach to a pole, garage, or a shed? We... View more questions Search
|