Ask Experts Questions for FREE Help !
Ask
    mandy8371's Avatar
    mandy8371 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Apr 19, 2011, 06:03 PM
    I have a Harbor Breeze Cheshire 42 and it only has the high speed.
    I have a Harbor Breeze Cheshire 42... it was running fine and now only runs in high speed. Any suggestions?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Apr 19, 2011, 07:19 PM

    Are you using pull chains or a remote?
    mandy8371's Avatar
    mandy8371 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Apr 20, 2011, 11:59 AM
    Pull chains... one for lights and one for speeds... no remote
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #4

    Apr 20, 2011, 02:53 PM

    So if you pull the speed chain 1 time, then 2, then 3 and then 4 times it always stays at the same speed?
    mandy8371's Avatar
    mandy8371 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Apr 20, 2011, 04:51 PM
    The 3 times I pull it the speed stays on high and then the 4th pull stops the fan.
    It was working fine and this just started this week.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #6

    Apr 20, 2011, 05:26 PM

    That's how things break, working fine one minute and not the next. The pull switch is bad and needs to be replaced. Post 6 in this link https://www.askmehelpdesk.com/electr...tml#post359211 gives contact info for the maker, buy an original equipment part from them.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor Breeze Ceiling Fan at high speed seems slow [ 7 Answers ]

I purchased an outdoor Harbor Breeze ceiling fan Baja model with the wide fan blades and used an outdoor rated extension cord (16 gauge and about 20ft long) to rig the electrical since I have no power source where it is hanging outdoor. I also used a Hunter remote. I think I connected everything...

Harbor Breeze Cheshire Installation problem [ 7 Answers ]

Just bought the Harbor Breeze Cheshire fan today. I have been trying to install it all day long. The problem I am having is with the plastic locking tab. This piece is supposed to slide into the mounting bracket and hold the motor assymbly in place. It doesn't seem to fit at all. I can slide...

NEW Harbor Breeze fan only operates in high speed [ 1 Answers ]

Hello, I recently installed a new Harbor Breeze ceiling fan with light kit, remote and no pull chains. I have installed numerous ceiling fans before without any previous problems. This fan in question operated A-OK for the first day or two. Now, the fan only operates in high speed, no matter...

Harbor Breeze- one speed- high [ 1 Answers ]

I installed a remote controlled Harbor Breeze Triton fan last weekend. Fan worked great for a week, now suddenly the remote won't control the speed. You can push any of the three speed buttons on the remote but fan only runs at fast speed. When you press a different speed button you can hear the...

Harbor Breeze fan only has high speed [ 2 Answers ]

I have recenlty installed a new Harbor Breeze fan in the bedroom of our new house. After I installed it, everything worked as it should. I had three speeds when using the pull chain and the light switched on and off with the other. One day I had it on the lowest setting and I came back into the...

View more questions Search