Ask Experts Questions for FREE Help !
Ask
    wicked_95z's Avatar
    wicked_95z Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 16, 2007, 02:03 PM
    Harbor Breeze fan only has high speed
    I have recenlty installed a new Harbor Breeze fan in the bedroom of our new house. After I installed it, everything worked as it should. I had three speeds when using the pull chain and the light switched on and off with the other. One day I had it on the lowest setting and I came back into the room and it was on high. Now the fan only works in the high speed mode through all three pulls of the chain and turns off on the fourth pull of the chain. Any insight? The other two fans I installed still work flawlessly. Thank you
    Mel_52's Avatar
    Mel_52 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Mar 18, 2007, 09:51 AM
    You could try using a wall switch that controls fans. They allow you to change the speed at the switch and you would want to fan on high anyway for this type of control
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Mar 19, 2007, 05:06 PM
    Sounds like a bad capacitor. Since it is a new fan, take it back.

    General ceiling fan troubleshooting and help FAQ- Ceiling Fans N More
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Harbor breeze fan [ 4 Answers ]

I have a harbor breeze ceiling with a remote that was never wired in.can I reverse the fan direction manually.

Harbor breeze fan [ 1 Answers ]

Where does the blue wire get connected to?

Harbor Breeze fan [ 3 Answers ]

Have a Harbor Breeze fan -Model AER52BP5LKRC - It has a 3 speed fan, lights w/ dimmer and a remote. The fan works fine with the remote. But the light only goes on and off - it won't dim. Is it wiring or the fan/lights?

Harbor breeze fan [ 1 Answers ]

We recently installed a harbor breeze fan. It worked fine initially, then did strange things. It stopped spinning one direction and reversed itself. It did this twice. Now the speed of the fan is not working at all - it barely turns. An electrician checked the installation and checked the...

Harbor Breeze fan [ 3 Answers ]

Just installed my fan and everything works perfectly. After 10 minutes, the HI speed does not work anymore when pushed on the remote (the fan is just stopped) and it looks like MED and LOW speeds are the same. Can anybody help me with this? Thanks

View more questions Search