[TTweaker]

Wow,
I'm trying to hook up a new Thermostat to my 3.ton Ac/Heat Pump with Emergency Heat Strips. The Ac unit was changed out about two years ago but the tech had troubles hooking up the Thermostat he had back then, it will freeze you out of the house before shuting off or on the Heat cycle run you out because it gets so hot.
The Thermostat is a Hunter Model # 44272 " say it's a Universal Electric air Conditioning. Up to 2 stage Heat/2 stage Coolingsystems. With single and two stage heat pumps with auxilary heat 24 volt and Millivolt systems."
Link to Thermostat: http://www.hunterfan.com/Products/Thermostats/Universal-Programmable-PLUS-5-1-1---44272/
--------------------------------------------------------------------|
GOODMAN Model #AR36-1,
Serial# 0203594582
Link to Info. on Goodman Unit:http://site.famousparts.com/goodman/AR18-61.html
The AC/Heat Pump with Emergency Heat Strips. Tech. that installed the AC unit pulled in all new wire including New Thermostat Wire 11 Colors.
Unit is a two part system The Air Handler is in the atic and compressor is outside. Checked to see what colors went where in atic at air handler, found as follows;
Wires NOT HOOKED UP Towards Thermostat in atic;
Dark Blue
Black
Brown
Gray
Pink
----------------------------------------------------------|
Wires NOT HOOKED UP Towards Ouside unit from atic;
Green
Black
Brown
Gray
Pink
-----------------------------------------------------------|
Goodman | Towards Thermostat from atic. | Towards Outside unit |
Red | Red | Red |
White | White | White |
Blue |Dark Blue "Not used towards Thermo." | Dark Blue |
Green | Green | Green "Not used towards the Outside Unit." |
Yellow "NOT USED COMING OUT OF AIR HANDLER" |
| Yellow hooked to++++ Yellow Outside Unit. |
| Orange hooked to +++ Orange Outside Unit.|
I'm Sorry I could not get the wire colors to lineup with the coulms.
I hope it makes some kind of idea of what my problem is.
I just need to know how to wire it up correct.
Thanks for and help in advance TTweaker...

[TTweaker]

Thank[/'s any how, I'll ]try and hook it up anyway. Again Thank's >>>
TTweaker...

[TTweaker]

Thank's any how, I'll try and hook it up anyway.
Again Thank's...
TTweaker...

[KC13]

The problems you have experienced with temperature control suggest that the system isn't wired correctly, or the previous thermostat wasn't working right for some reason. The thermostat installation instructions don't indicate whether the "C" (blue) circuit is necessary, but a terminal is provided for connecting it. I would suggest doing so if you haven't already. It may minimize drain on the batteries. If you can provide the model # or web link to the indoor unit, a wiring diagram may be accessible. I have concerns that something may be wired wrong there.