 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Weatherking 80PJ07EBR01 No flame. Draft inducer not running
I've got a Weatherking 80PJ07EBR01 furnace that just stopped heating. The main blower runs, but the draft inducer won't start and there is no flame. The blades of the inducer seem to turn over fine. I couldn't get any error codes to come up. Any idea what might be causing this? Thanks!
|
||||
Check out some similar questions!
I have a 5 yr. old dunkirk xeb3 boiler. This year on starting I noticed a smell of burnt gas coming out from around the draft inducer housing. I checked housing and gasket, both seemed fine. Fan only runs for approx. 5 seconds before ignition, and shuts off right after flame stops. Could this be...
...
Furnace ignitor doesn't light. Error Code on the PCB says Pressure Switch is open. How do I fix this?
FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S
The draft inducer on my furnice is stuck or something, it makes a humming noise for an extended period before the heat kicks on. The blower, the heat ignition everything is fine. It also seems like it starts too frequently.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
