Draft inducer does not start

petewisconsin Posts: 3, Reputation: 1

New Member

Dec 19, 2009, 05:19 PM

Draft inducer does not start

...

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Dec 19, 2009, 05:35 PM

OK so now that you told us that tidbit what is the rest of the story?

Add your answer here.

Check out some similar questions!

The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman. [ 8 Answers ]

FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S

Looking for a draft inducer fan #621080 Anybody? [ 2 Answers ]

I'm looking for a draft inducing fan, part #621080. Any help would be great [email protected]

Draft inducer humming [ 1 Answers ]

The draft inducer on my furnice is stuck or something, it makes a humming noise for an extended period before the heat kicks on. The blower, the heat ignition everything is fine. It also seems like it starts too frequently.

Draft Inducer won't start (it just hums unit I spin the fan blade) [ 2 Answers ]

When thermostat asks for heat, the furnace won't start unless I physically give the fan blade on the draft inducer a spin. What can be causing this?

No voltage to my draft inducer [ 3 Answers ]

I have a Janitrol Furnace that will not start up. I pulled of the tube from the draft inducer to the pressure switch. I sucked on the tube and the furnace fired up. So I checked the voltage going to the draft inducer, it read only 6v ac. Where do I go from here?