 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Heil Gas Furnace and the blower keeps running all the time. The heat comes on when called to but once the temperature gets warm enough for the heat to turn off the fan keeps running. Once the heat turns off the fan blows cold air. The fan is on auto and I have cycled power several...
I own a Heil SP80 residential furnace. Just recently, I noticed the blower motor(room air circulation) failed to run after the furnace ignited and heated the heater box. When I manually rotated the blower motor fan to get it started the blower motor would run on its own but only at low speed... I...
Heil dc90 furnace blower motor won't stop running removed the thermostat totally it still runs I replaced the chip board an the motor still just runs. There is no flame i.e. no heat.
Okay, so the heating/ac guy cannot get out for a few days, so I started diagnosing things myself. My blower (rheem residential gas/ac unit, less than 6 years old) was slowing down and finally quit. I had the motor checked out and it was dead at this point (very dirty, had been running on very...
I have a Heil high efficiency furnace about 15 years old. Sometimes the burner will start and the exhaust blower then the blower fan will blow for a short time and stop. The burner will still be very hot. It used to continue to run until the furnace cooled down. What could be wrong?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
