Heil dc90 furnace blower motor won't stop running

u00alr6 Posts: 1, Reputation: 1

New Member

Mar 29, 2010, 06:35 AM

Heil dc90 furnace blower motor won't stop running

Heil dc90 furnace blower motor won't stop running removed the thermostat totally it still runs I replaced the chip board an the motor still just runs. There is no flame i.e. no heat.

Check out some similar questions!

Furnace blower motor start and keeps running won't stop [ 12 Answers ]

I have a Carrier central furnace (furnace model 58GP050-BA). Now with the thermostat off the fan set to auto and the Gas pilot is on. When turn on the power switch to the furnace, the blower motor start and keeps running and won't stop. I have to turn off the power switch to the furnace to turn the...

My Heil gas furnace blower keeps running [ 4 Answers ]

I have a Heil Gas Furnace and the blower keeps running all the time. The heat comes on when called to but once the temperature gets warm enough for the heat to turn off the fan keeps running. Once the heat turns off the fan blows cold air. The fan is on auto and I have cycled power several...

Heil dc90 furnace fan always on [ 1 Answers ]

I recently purchased a house with a Heil DC90 furnace. I just realized that the furnace fan never turns off. The heating is working properly and it keeps the temperature in the house just fine. However I am concerned that the fan is always on. The fan control switch on the thermostat is in the auto...

Furnace blower motor will not stop running [ 3 Answers ]

Furnace blower motor will not stop running

Darft Inducer Blower - Heil DC90 [ 3 Answers ]

My gas furnace worked fine until a day or so ago. Everything works OK during furnace startup, but the draft inducer motor does not turn off until the call for heat is over. The draft inducer motor shuts down the same time as the burners shut down. Is this normal? Isn't the inducer motor suppose...

View more questions Search

Check out some similar questions!

Add your answer here.