Ask Experts Questions for FREE Help !
Ask
    DirtyRatBastard's Avatar
    DirtyRatBastard Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 13, 2011, 04:30 PM
    Bryant Furnace Will Not Turn On
    Bryant 310JAV - no blinking [LED]
    Fan works
    New filters
    Exhaust clear
    All registers clear

    Is there a reset switch located on the circuit board or elsewhere in the system. I have turned off the unit for 3 hours [unplugged].

    Thanks.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Jan 13, 2011, 07:35 PM
    If you have no blinking lights at the furnace with no heat(Do you have any lights on?). It tells me the problem is with the thermostat or thermostat wire. If you can remove the thermostat cover and jump from R to W will it work? If not take the bottom door of the furnace off and tape the door switch closed. Jumper from R to W on the control board, It should work, if not you should have a light blinking. If know lights are on you have a power problem 115 volts.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Switch furnace to emergency mode on my Bryant 90 furnace [ 2 Answers ]

I have run out of propane and we are in the middel of a blizzard. How can I switch my furnace to emergency mode? Thanks, Brett

Bryant furnace model 373lav won't turn on [ 1 Answers ]

Hello, My Bryant furnace model 373lav won't turn-on. At first, I can see the one of the stick in front of the burner glowed red followed with the hissing sound of the gas turned on, but nothing happened after that-the furnace did this 3 times and the burner never came on. * Filter is clean...

Bryant furnace won't turn off [ 0 Answers ]

I have 80+ Bryant gas furnace. It will not turn off after reaching the set temprature. Thermostat work OK. I have no issues with my AC.

Bryant furnace don't turn off after reaching the set temp [ 9 Answers ]

Hello, I have 10 year old bryant 80+ furnace and programmable thermostat which I replaced with new one to fix this problem. The furnace will work fine start and stop if I keep the temp at 63 degree. If I rase the temp to 65 degree it will not turn of and will keep running until you turn off te...

View more questions Search