 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a bryant from 1991. When I turn up heat the fan starts then ignitor starts, lights pilot and will run like that for about 5mins then shuts down and won't try to relight until I reset the power. When the pilot lights the flame is kind of weak. The blower is blowing it hard and it will...
The fan will not shut off unless I shut off the gas switch . Just changed the thermostat only cold air is coming out Any ideas
Hello, I have 10 year old bryant 80+ furnace and programmable thermostat which I replaced with new one to fix this problem. The furnace will work fine start and stop if I keep the temp at 63 degree. If I rase the temp to 65 degree it will not turn of and will keep running until you turn off te...
I have a bryant gas furnace model 383kav038070. I get trouble shooting code 12. What has failed. I do not have code table
I have a bryant gas hot air furnace model #397HAW036100. It has been nothing but trouble since day 1. here's my problem this year again. Purge fan kicks on gas valve goes on to pilot lights. Clicks on gas valve and pilot goes out. Does this about 6 times before it locks out. Last couple years...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
