Ask Experts Questions for FREE Help !
Ask
    chaunguyen's Avatar
    chaunguyen Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 13, 2009, 01:31 AM
    Bryant furnace model 373lav won't turn on
    Hello,

    My Bryant furnace model 373lav won't turn-on. At first, I can see the one of the stick in front of the burner glowed red followed with the hissing sound of the gas turned on, but nothing happened after that-the furnace did this 3 times and the burner never came on.

    * Filter is clean
    * My furnace was service back in June, 2009-everything looked clean.

    I've reset the interlock located at the panel several times and now nothing happened when I turned on the heater. No glowing stick, no gas hissing sound and the LED stayed solid red.

    Please help!
    chaunguyen's Avatar
    chaunguyen Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Dec 13, 2009, 11:25 AM

    Got it fixed! Found out the furnace gave me an error codes 14 and 34. The flame sensor looked clean, but clean it using sandpapers and that fixed it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 373LAV Furnace - Blower will not shut off [ 7 Answers ]

Good afternoon all, My question is in regards to the Bryant 373LAV Downflow/Horizontal gas furnace. A good friend of mine called for my help because about a month ago, her furnace blower randomly began running all the time and the only way she could shut it off was to flip the breaker on the...

Bryant 373LAV Furnace - Heater will not work [ 3 Answers ]

Hi and thanks in advance for any help you can offer. I have 2-Bryant 373LAV Furnace/AC units mounted horizontally in my attic. The 1st floor unit has been operating intermittently when the t-stat calls for heat. I've already confirmed that the stat, fan and AC are operating.. and it's been a hit...

Bryant furnace model 310 AAV/JAV [ 3 Answers ]

Thought the thermostat was bad so replaced the thermostat, sounds like it clicks on but not blowing of the air, and the red light still blinks 2 shorts 4 longs, pilot light also won't come on now. Have done the swith where you turn it off for 5 minutes, still trying to troubleshoot, could use...

Bryant 373LAV furnace [ 10 Answers ]

My Bryant 373LAV furnace has different flame pattern from what is shown in the manual (http://www.gogeisel.com/geiselonline/support/Bryant/373LAV_376CAV_383KAV_395CAV_Gas_OM.pdf) . While in the book flame comes straight from the front of the burner tubes, in my furnace flame starts below the front...

Bryant 373LAV Horizontal Gas Furnace will not light [ 1 Answers ]

Hello All, My Bryant gas furnace will not light. It will go through the motions like it wants to run but it never lights, nor does the fan run on the auto setting; only on the manual setting. It is also on some sort of time delay; if the thermostat is set higher than room temp. the furnace...

View more questions Search