 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
A haier 80k furnace with sv95,runs continually,with nogas valve trials,the controlboard does not show any fault codes.
Ducane furnace with ST9160B control card : I have a Smart Valve (SV9520H) that seems to pass all tests and shows nothing is wrong (according to indicator flashes) Hot surface Ignitor glows, valve solanoid clicks to allow gas to come out but nothing comes. I disconnected Gas and tried to blow...
Have natural gas hot air furnace with honeywell smart valve SV9520H8067. Unit calls for heat and ignites OK but only stays lit for 5 seconds and goes out. Have had smart valve replaced 5 years ago. Does this sound like another smart valve problem?
How do you check a concord furnace smart valve? Stat is calling. Green light on smart valve is on . But nothing takes place. There is 24 volts to the board on the w. check inducer motor. Its OK . With gas off at the gas cock valve inducer motor running glow coil got on 110 current, so is the smart...
Hello, I have two questions. I have a Tempstar gas furnace that has a intermittent smart valve issue. It sometimes goes days and works fine and others, it will not open the main gas line. I get an orange glow from the ignitor, but the gas never comes on and the cycle ends after a few tries....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
