Ask Experts Questions for FREE Help !
Ask
    rmalone's Avatar
    rmalone Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 3, 2008, 12:01 PM
    Check a concord furnace smart valve?

    How do you check a concord furnace smart valve? Stat is calling. Green light on smart valve is on . But nothing takes place. There is 24 volts to the board on the w. check inducer motor. Its OK . With gas off at the gas cock valve inducer motor running glow coil got on 110 current, so is the smart valve bad?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 3, 2008, 12:33 PM
    With gas off at the gas cock valve

    Try turning the gas valve ON.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concord 80 plus gas, furnace [ 5 Answers ]

Hi, glad to find some help, I found your site by accident,or my good fortune! I have a concord 80 , the thermostat clicks and the blower comes on but the furnace does not light,all help appreciated

Honeywell Smart Valve failure [ 2 Answers ]

I have a Tempstar furnace and what is happening is the furnace will call for heat and the draft inducer motor will come on and after a momont I will hear the pressure switch go and nothing happens. The electric glow rod does not glow and the furnace does not fire but here is the catch the first...

Furnace filter for a Concord 80 plus furnace [ 2 Answers ]

I just moved into a beautiful home. I am currently a renter. There is a new concord 80 plus furnace installed. I know it needs a filter but I'm not for sure as to where it goes?

AC/Heating - smart valve [ 16 Answers ]

We have a home (PA) that only had electric heat when we purchased 7 years ago. Added central air-conditioning. A year later added central propane heating. The heating system "died" a couple of weeks ago. The service company replaced the control board and said it worked. It did not, and they...

Smart valve [ 2 Answers ]

Hello, I have two questions. I have a Tempstar gas furnace that has a intermittent smart valve issue. It sometimes goes days and works fine and others, it will not open the main gas line. I get an orange glow from the ignitor, but the gas never comes on and the cycle ends after a few tries....


View more questions Search